UriahJulian
Industry info Wiki Q&A
Q will a check engine light fail inspection in texas
WalterGill
UriahJulian Release Time: 3月 30, 2024, 3:01 下午
Yes, in Texas, a check engine light will fail a vehicle inspection. During the inspection, the car’s onboard diagnostic system will be checked, and if the check engine light is on, it indicates that the system has detected a problem.
0
Q a c off due to high engine temp chevy cruze
UriahJulian
RebeccaLee Release Time: 3月 30, 2024, 3:16 下午
There could be a several reasons why your Chevy Cruze’s AC is off due to high engine temperature. Here are some common reasons: 1. Overheating Engine: If your engine is overheating, it may be due to a problem with the cooling system. This could be anything from a broken water pump, a leaking radiator, or a damaged thermostat. The AC system may be turning off to avoid exacerbating the issue and prevent further damage to the engine. 2. AC Condenser: The AC condenser can also cause the engine to overheat if it’s not properly cooling the refrigerant. This could be due to a blockage or damage to the condenser. 3. Coolant: The coolant could be low or you could be using the wrong type of coolant for your vehicle. This would explain why your engine is overheating. 4. AC Compressor: The AC compressor could also be the problem. If it’s faulty or failing, it can cause the engine to struggle and overheat. 5. Vents in Engine Bay: If the vents in your engine bay are blocked or cove...
0
Q how to adjust hydraulic lifters with engine running
NicolaBlume
UriahJulian Release Time: 3月 22, 2024, 5:48 下午
Adjusting hydraulic lifters with the engine running is a somewhat advanced task, primarily performed on older or performance vehicles equipped with pushrod engines. To proceed, start the engine and let it reach operating temperature. This ensures the hydraulic lifters are fully expanded from the engine’s heat. Identify the rocker arms and listen for any tapping sounds indicating loose lifters. One at a time, slowly tighten the rocker arm nuts (or adjustment screws, depending on the engine) until the tapping stops, signifying that the lifter plunger is just making contact with the pushrod. From there, tighten the nut an additional quarter to half a turn. This additional tightening preloads the lifter, ensuring it maintains contact without leaving it too tight, which could keep the valve open and lead to engine damage. Use caution, as the engine components will be hot, and moving parts pose risks. Always wear appropriate safety gear. Not all engines are suited for this method. Cons...
0
Q can you use engine oil on decking
UriahJulian
XavieraWheatley Release Time: 3月 22, 2024, 5:54 下午
Using engine oil on decking is not recommended. Engine oil, intended for vehicle engines, contains chemicals and additives that can be harmful to wood and the environment. Unlike specialized decking oils designed to penetrate, protect, and preserve wood, engine oil can degrade the wood’s integrity over time. Additionally, it can create a slippery, hazardous surface and may leach into the ground, posing environmental risks. For decking maintenance, it’s best to use products specifically formulated for wood treatment, offering protection against weathering, UV damage, and moisture, while enhancing the wood’s natural beauty. Always consider environmentally friendly and safe options for both the wood and its surrounding environment.
0
You May Like
  • 小敏测试128
  • 5xiaominrenminbiAAABBB
  • XH-3G-2 Cornstarch 3 compartment rectangle food container
  • Xinweiye Heavy Calcium Carbonate 1000 Mesh
  • Extinction Barium Sulfate TDD-2500
  • Special black pigment for primer
  • Factory directly supply good price disposable food container 3 compartment cornstarch rectangle food container
Q&A
Popular Information
Contacts Us:
Tel：+86-400-880-7283
email：tdd-global@toodudu.com
User Agreement Privacy Policy Cookie Policy Intellectual Property Protection Policy About us
京公网安备11010602201123号 京ICP备11010602201123号
Copyright © 2021-2025 TDD-global.com .All Rights Reserved